Honda WT20

Call Us for Price
In stock
SKU
WT20XK4A

2" Trash Pump

  • 185 gal./min capacity
  • Solid handling capability up to 13/16"
  • Cast iron volute and impeller
  • Quick clean out port
Heavy-duty 2" construction trash pump
Heavy-duty 2" construction trash pump

Specially designed for job sites and applications where high volume trash water capacity is needed.

Easy starting Honda OHV commercial engine
Easy starting Honda OHV commercial engine

The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.

 
185 gal./min capacity

 

Solid handling capability up to 13/16"

 

Heavy duty full frame protection
Heavy duty full frame protection

Protects the pump, while offering a convenient tie down location for transport.

Easy quick clean out port
Easy quick clean out port

The WT20 is designed for quick and easy service. An easy access service port makes clean-out quick.

 
Replaceable stainless steel wear plate

The volute is equipped with a replaceable stainless steel wear plate, which increases durability and reduces maintenance costs

Standard service tool
Standard service tool

A convenient multi-tool is provided for easy removal and installation of the pump case, for tightening and removal of the priming plug and drain plug, and for tightening and removal of the hose coupling.

Durable silicon carbide mechanical seal
Durable silicon carbide mechanical seal

The WB20 features abrasion-resistant silicone-carbide seals for extended wear.

Cast iron volute and impeller
Cast iron volute and impeller

The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.

Isolation mounted engine and pump
Isolation mounted engine and pump

High performance mounts minimize vibration, keeping the pump from “walking" away or “burying" itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.

Unique conical shaped impeller
Unique conical shaped impeller

The unique shape improves priming and higher discharge capacity. Wide vanes are designed to resist wear and maximize durability.

Protected by Honda Oil Alert<sup>&reg;</sup>
Protected by Honda Oil Alert®

Protects the pump by shutting the engine off when low oil is detected.

 
Large heavy duty metal strainer

The strainer allows up to 13/16 in. solids to pass through, as well as a large volume of water, helping to prevent clogging. Made of steel to withstand tough conditions.

 
More Information
Engine GX160
Displacement 163 cc
Bore & Stroke 2.7" x 1.8"
Compression Ratio 9.0:1
Oil Alert Standard
Pump Type Trash Centrifugal Self-priming
Volute Rigid Mounted Cast Iron w/ Stainless Wear Plate
Impeller Conical Cast Iron
Mechanical Seal (Pump case / impeller) Silicon Carbide/Silicon Carbide
Priming Time 60 sec. @ 16.4 ft.
Drive System Direct
Discharge Capacity 185 gal/min
Suction Port Diameter 2"
Discharge Port Diameter 2"
Total Head Lift 85 ft.
Suction Head Lift 26 ft.
Maximum Pressure 37 psi
Solids Handling 13/16 inches
Dimensions (L x W x H) 24.4" x 18.1" x 18.3"
Dry Weight 104 lbs.
Fuel Capacity 0.82 gal
Run Time @ Max Discharge 1.5 hr
Strainer Part Number 78325-YG0-003
Residential Warranty 24 Months
Commercial Warranty 12 Months
Copyright © 2024 Tele-lite, Inc. All rights reserved.